#Gns3 asa activation key#

I am still unable to ping 8.8.8.8 from 10.0.0.100, here is the packet-tracer output as requested:Ĭiscoasa# packet-tracer input inside icmp 10.0.0.100 8 0 8.8.8.8 Okay, you are right in saying the packets are not dropped when doing a packet tracer to 192.168.8.1. * - candidate default, U - per-user static route, o - ODR I - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2Į1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP In 192.168.8.250 255.255.255.255 identityĬodes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGPĭ - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area Ping from ASA-1 inside interface - UnsuccessfulĬiscoasa# packet-tracer input inside icmp 10.1.0.1 8 0 192.168.8.250 Ping from PC1 to ASA inside interface - Successful Quite simply put, the ASA seems to have no route between two directly connected interfaces (inside & outside). It is worth noting that I am able to ping the inside interface of ASA-1 from both PC1 and R1. When pinging from the firewall I am able to ping outside to 8.8.8.8, however, when pinging from the inside interface, PC1 or R1 I am not able to reach 8.8.8.8. The problem I am having is as follows: I am unable to pass traffic through the firewall from inside to outside with the following Drop-reason: (no-route) No route to host

I have a directly connected inside network of 10.1.0.0/24 and an outside network of 192.168.8.0/24. It is fairly straightforward in terms of networks. I have created a lab in GNS3 utilizing the GNS3 VM: I know there are similar posts on these types of issues, however none seem to have assisted me in resolving my issue. * Disclaimer, this will only work on this virtual ASA, and it’s published elsewhere on the Internet, if I receive a request to remove it I will do so. gns3 asa

#Gns3 asa activation key#

An ASA Activation key is usually linked to the serial number of the ASA, in this case we don’t have a serial number, (that’s not strictly true, if you check, it’s something like 12345678).

When the ASA starts it has all the licenses disabled, to add them you need to change the ASA’s activation key. You can now drag an ASA onto the workspace and console into it (it takes a while, be patient). Should you wish to locate these files form a less reputable source you are looking forĪsa842-initrd.gz and asa842-vmlinuz, again don’t email me for them! If you are too stupid to use a search engine, then technical ninjary is not the correct career choice for you.ĩ. You need to create these from a legally obtained copy of the asa843-k8.bin file. Qemu > Qemu VMs > Add > Set the type to ASA 8.4(2).Ĩ. Dynamips > IOS Routers > New > Add in your route images > Follow instructions. The defaults are fine but if you run GNS3 on several machines you might want to choose something like Dropbox > Apply > OK.ģ. Edit > Preferences > Check that the path to the ‘projects’ and your ‘images’ folder are where you want them to be.